The all-in-one GOGGLES with build- in A/V receiver and virtual real-time large-screen display can connect with the RC Transmitter with a data cable, RC Transmitter supply power to the AIO GOGGLES. Along with the AIO GOGGLES tracking signal output to the RC Transmitter, the AIO GOGGLES tracking signal and the RC Transmitter control signal received by the receiver in the RC Aircraft. Images and sound captured by Camera are transmitted to the sky by the A/V Transmitter, Then, AIO GOGGLES can receive video and audio within a certain range, people who wear a AIO GOGGLES can see the images from the virtual real-time large-screen display, and hear the sound from the earphone.
The front camera is wide-angle camera with 680 x 480 (VAG) resolution and good low illumination. It is very convenient to view around without removing the Googles. The external camera allows you to keep the goggles on for small jobs and landing. The lens on the external camera does seem to make things look farther away. Press “Camera” button to open the front camera.
5.8 Diversity Unit:
These goggles have a built-in 8 channel/4 band 5.8G diversity unit. This allows you to use this unit with most FPV 5.8G transmitters on the market like Foxtech, DJI, Walkera and more.
Dual Receivers & Dual Antennas:
There are two 5808 receivers in this set of goggles. The unit comes with two vertical omni stock 50ohm antennas with SMA connectors.
1 x Skyzone SKY01S 40CH FPV Goggles
2 x 5.8G 2dbi Antennas
1 x AV Cable
1 x FUTABA Data Cable
1 x JR Data Cable
1 x WFLY Data Cable
1 x Power Cable
1 x Carry bag
1 x Manual
Built-in Dual Diversity Receiver and Wide Angle Front View Camera
Built-in Dual-Axis Head Tracking System; IPD Adjustable
High Resolution: 854 x 480 (WVGA), 1230K Pixels
High Sensitivity 5 Bands Total 60 Channel Receiver
Wide Voltage Support: 7V-28V (2S-6S Lipo Battery) (Battery Not Includes)