BETAFPV FPV FC F3 EVO Brushed Whoop Flight Controller Brushed Long Range Version with Native Frsky Receiver
Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: Betaflight SPRACINGF3EVO 3.1.6
Receiver: Frsky D8 potocol with PA
Currently the built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules with International Firmware.
This built in receiver integrate a power amplifier IC (PA) RFX2401C, so you could get up to 1 kilometers long range. This is the biggest improvement than other board with no PA included. Also this receiver supports RSSI telemetry.
EU Frsky Taranis Incompatibility Issue The native Frsky receiver on the BETAFPV FC boards only could support D8 protocol. This is not incompatible with the Frsky Taranis radio transmitter in EU firmware. Please find details here,
1 * F3 EVO brushed flight controller ( 55mm PH-JST 2.0 power cable soldered)
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
4 * Ruber dampers
1 * 55mm PH-JST 1.25 power cable pigtailFully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID’s, and rates to your perfect settings
Designed to work with current Tiny Whoop or Blade Inductrix setups
EU Frsky Taranis Incompatibility Issue The native Frsky receiver on the BETAFPV FC boards only could support D8 protocol. This is not incompatible with the Frsky Taranis radio transmitter in EU firmware. https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter
With PA integrated, up to 0.5 Kilometers long range, with RSSI telemetry
The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.